Close

121444VX778

Print this page
Description
  • Brand APEM
  • Product Code121444VX778
  • Stock StatusPre-order
  • Stock0
APEM 12000X778 Series 2 Poles ONONON Toggle Switch

This range of professional toggle switches is suitable for use in military and other
high specification environments. CECC and MIL approved, the 12000X778 toggle switch
has a double shell case construction and pinned lever for extra mechanical strength
and robust seal up to IP67. Available with solid rivet contact: gold plated silver/nickel alloy.
Comprehensive range of sealing boots and security caps available.
486.24 €
Piece
Piece Unit price Total
10 110.69 € 1,106.90 €
25 105.42 € 2,635.50 €
50 88.02 € 4,401.00 €
Property Name Property Value
SERIES 12000x778
TERMINALS AND BUSHINGS Solder lug
NUMBER OF POLES Double Pole
ELECTRICAL FUNCTIONS ON ON ON | ON ON MOM | MOM ON MOM
FLUORESCENT TIP None
LEVERS Standart
We'll Call You


Thank you,
We will contact you as soon as possible

Send
  • GENERAL SPECIFICATION
    • Torque: 1.50 Nm (1.10 Ft.lb) max. applied to nut
    • Panel thickness: 8 mm (.314) max. - 3 mm (.118) min.
    • Electrical life:
    - At 4A 28VDC:
    20,000 cycles (10,000 for functions 5, 4-1R, 4-2R)
    - At low level (50mV 10mA):
    150,000 cycles (switches with 2 maintained positions)
    100,000 cycles (switches with 3 maintained positions)
    50.000 cycles (momentary functions 7, 8, 4-1R, 4-2R, 5)
     
    ENVIRONMENTAL SPECIFICATIONS
    • Shock test: 50g - 11ms (IEC 68-2-27)
    • Vibrations: 10-500 Hz - 10g (IEC68-2-6)
    • Operating temperature: -40°C to +85°C (-40°F to 185°F)
    • Humidity test: 56 days, 93 % R.H., 40°C (IEC 68-2-3)
    • Salt spray test: 96 hours (IEC 68-2-11)
    • Front panel sealing by two O-rings flatted bush for precise orientation
    • Panel seal withstands 1 bar pressure and remains sealed even when the switch is operated.
    • Epoxy sealed terminals
    • Splash-proof case
     
    ELECTRICAL SPECIFICATIONS
    • Max. current/voltage rating with resistive load: 4A 28VDC
    • Minimum load: 10mA 50mV, 10µA 5VDC
    • Initial contact resistance: 10 m? max.
    • Insulation resistance: 1,000 M? min. at 500VDC
    • Dielectric strength:
    1,000 Vrms 50 Hz min. between terminals
    2,000 Vrms 50 Hz min. between poles 
    • Contact bounce: 2 ms max.
     
    MATERIALS
    • Case: diallylphthalate (DAP) with plastic external shell (epoxy sealed)
    • Actuator: brass, black chrome plated
    • Bushing: brass, black chrome plated
    • Contacts: solid rivet - gold plated silver/nickel alloy

Atakel Store © 2024 | RGS Yazılım® E-ticaret Software

Email: [email protected]