5249WAKBX386

Print this page

Description

Brand APEM
Product Code5249WAKBX386
Stock StatusPre-order
Stock0

APEM 5000 Series Double Pole ONOFFON Toggle Switch

The widest range in miniature toggle switches diameter 6,35 mm available in a wide range models & amp options..

MAIN FEATURES
17 actuators including toggles, paddle levers and locking levers in different lengths.
5 contact materials from dry circuit to 6A 125VAC and high inrush up to 120A 2 ms.
8 functions including maintained and momentary versions
1 to 4 pole configurations.
12 terminal types including 9 for PC board mounting. Other types include quick-connect and wire-wrap.
3 types of finish including military black
4 approvals (UL - CSA - VDE - CECC)
4 types of sealing for terminal or front panel requirements.
Numerous accessories available for actuator and bushing options.

5000 Series Datasheet

248.84 €

Piece	Add to Cart
Birim Fiyat
Toplam Fiyat

Piece	Unit price	Total
25	27.65 €	691.25 €
50	18.43 €	921.50 €
100	11.50 €	1,150.00 €

Property Name	Property Value
SERIES	5000
TERMINALS AND BUSHINGS	Straight PC terminals, 4.70 (.185) terminal spacing, right angle or quick-connect
NUMBER OF POLES	Double Pole
ELECTRICAL FUNCTIONS	ON OFF ON
TERMINALS	Right angle, horizontal mounting (5200 - 5400 switches)
CONNECTIONS FOR FUNCTION 4	Not Function 4(See Sheet)
MOMENTARY FOR FUNCTION 4	Other Options(see sheet)
CONTACT MATERIALS	Silver
FINISH	Nickel plated
SEALING	Epoxy sealed terminals & Front panel sealing by one O-ring and sealing washer
FLUORESCENT TIP	None
LEVERS	10.5 (.413) (threaded bushing or plain bushing)

We'll Call You

Description

GENERAL SPECIFICATION

• Torque: 1,25 Nm (.922 Ft.lb) max. applied to nut

• Panel thickness: 2.5 mm (.098) with 2 nuts - 4 mm (.157) with 1 nut

• Low level or mechanical life: 100,000 cycles

ENVIRONMENTAL SPECIFICATIONS

• Operating temperature: -40°C to +85°C (-40°F to 185°F)

ELECTRICAL SPECIFICATIONS

• For inductive, lamp or capacitive load, consult factory.

• Initial contact resistance: 10 mΩ max.

• Insulation resistance: 1,000 MΩ min. at 500VDC

• Dielectric strength:

1,000 Vrms 50 Hz min. between terminals

1,500 Vrms 50 Hz min. between poles

1,500 Vrms 50 Hz min. between terminals and frame

• Contact bounce: 2 ms max.

• Electrical life at full load:

50,000 cycles for single and double pole 40,000 cycles for 3 pole

30,000 cycles for 4 pole

MATERIALS

• Case: diallylphthalate (DAP) or high temperature plastic material (UL94-V0)

• Actuator: brass, nickel plated

• Paddles: UL94HB polyamide

• Lever caps: vinyl

• Bushing: brass, nickel plated

• Housing: stainless steel or steel tin plated

• Contacts A: silver

AD: silver, gold plated

CD: brass, gold plated

X814: for peak currrents, see “Special options”.

• Terminal seal: époxy

APPROVALS

CECC CSA UL